The type of vehicle usually found within warehouses, factories and other work sites where moving heavy materials from one location to another is necessary is referred to as a forklift. The mast is the mechanism located on the front of the forklift that hydraulically lowers and lifts the load. The "cat" is the protected area where the driver of the forklift sits.
Forklifts could carry loads which weigh between one to five tons. Some types could be utilized to carry shipping containers and loads that are a lot heavier.
The tires of a forklift must be inspected and maintained regularly. The kinds of tires on different forklifts differ based on factors like for example frequency of use, weight of the loads and ground surfaces. Every forklift operator should have access to a forklift jack, tire press and replacement tires.
Tire Maintenance Instructions
Carry out tire inspections regularly. Watch for signs of wear and damage to the tires. If the wear on the tire exceeds 40%, it should be replaced.
When purchasing tires, make sure that you are purchasing the right type - solid, pneumatic or polyurethane.
When you need to replace the tires, the forklift jack must be positioned under the tire. You could easily change the tires if you raise the forklift high enough.
You can utilize the tire press to pull the tire from the rim and remove the damaged tire. Install the new tire and properly secure it. If you are changing more than one tire and you have just one jack, lower the forklift, and after that reposition the jack at the next tire.
On-site tire repair could be performed by a repair company. If the tire is too big for both in-house and mobile tire presses, the tire which is damaged should be transported to a shop that has a stationary tire press.